Subaru BRZ Rear Suspension Drop Knuckle Kit


The Subaru BRZ is an excellent car for driving enthusiasts, performing well on both, the streets and on racetrack. If the focus is on performance, the car can improve by lowering the ride height, but this can negatively impact the factory-designed kinematics. The Wisefab suspension kit addresses this issue by restoring the roll center, bump steer, anti-squat, and camber curve to normal levels, resulting in better roll stiffness, handling, and grip.

Be sure to check out the lock kits for Subaru BRZ:

Subaru BRZ Front Drift Angle Lock Kit RHD (Right hand drive version)
SUbaru BRZ Front Drift Angle Lock Kit LHD (Left hand drive version)

Subaru BRZ Front Lock Kit for Lexus IS steering rack relocation version


Scroll down to order the spare parts for your Subaru BRZ conveniently right here!

3 286,00 €
Jospa maksaisitkin osamaksulla? Joustolla saat jopa 12 kuukausierää.
Postnord Kotiinkuljetus
Yli 1000€ ostoksille, ilmainen kotiinkuljetus
  • -7 kg of combined weight saving over original components
    But still maintaining required strength and stiffness
  • 7075-T6 aluminium billet CNC knuckles
    With optimized double shear design that provides low weight and high strenght
  • All the rear links and arms are made of high strength steel
    CrMo rod ends and sphericals used instead of rubber bushings
  • Adjustable shock motion ratio
    Shock motion ratio can be adjusted by changing the shocks position on the arm. It can be done quickly and has the effect of changing the springrate. This means that understeer or oversteer can be removed within a few minutes
  • Easy camber adjustment
    Camber shims are used for adjustment
  • Bump steer adjustment
    Possibility to adjust bumpsteer by changing washer locations

Kit includes:

  • Pre-set suspension arms
  • Knuckles with hardware
  • Camber adjustment shims
  • Installation guide



Other information:

  • Track is the same as original, as this is defined by halfshaft lengths
  • This kit assumes coilovers
  • Original wheel speed sensor can be used
  • Possibility to use Nissan S-Chassis hub with bigger CV joint
  • Minimum rim size is 17“